How To Measure For A Chandelier
With the holiday closing in once again, perhaps you are thinking about your dining room decor. Does that old chandelier look wrong? Is it too small? Too large? Does Uncle Pete hit his head every time he stands up? It might be time to replace it with one that is the proper size. BONUS: When a chandelier is properly sized, it usually results in providing the right amount of light for the space.
Here are the quick and easy ways to pre-measure before you buy a new chandelier for your dining room. TIP: Always use the maximum wattage recommended by the manufacturer, then use a dimmer switch to simply adjust the brightness according to the occasion.
Sparkle 1: Measure the Width + Length of the room in feet (for example, 11 ft. wide plus 14 ft long = 25 ft)
Sparkle 2: Take this measurement and change it into inches (there is no math to do, i.e., 25 ft becomes 25 inches) Voila! This is the correct width of the chandelier for the space.
Tip for Option A: You can also use this method when not hanging a light over a table, but you must consider the ceiling height for head clearance. It would be embarrassing if cousin Patty's ponytail got caught on the hanging crystals and worse if a guest gets knocked out! If you are tight on height and want to use a chandelier, consider a semi-flush mounting instead of hanging from a chain -- this can save inches.
Sparkle 1: Measure the width of the table
Sparkle 2: Subtract 6 inches from each side or a total of 12 inches (for example, a 48 inch table minus 12 inches = 36 inches) Voila! The perfect size for your dining room table.
Sparkle 3: Measure UP from the table to hang the 36 inch wide chandelier so that the arms of the bottom level of lights hang 30 - 33 inches above the table; do not use the center bottom drop/crystal or it will be hung too high. Note: The picture above depicts a typical chandelier shape with the candlestick arms as the bottom level, and the obvious lowest hanging center crystal. Sitting down as if at the table helps to judge the exact hanging height within the 3 inch allowance; remember to consider where the applied crystals (if any) will hang. Also, think about your centerpieces, candlesticks, etc., before deciding.
Good luck and happy chandelier hunting. Hope these tips help your holiday table sparkle bright light with the right light!
The comments to this entry are closed.